Vyborgrad
  • Main
  • Shop
    • For CNC
    • For laser
    • For 3d printer
    • For Cricut & Silhouette
    • Harry Potter universe
    • Layered pannos
    • Printable
    • Vector clipart
    • Fonts
  • Blog
    • Articles
    • Editable forms
  • Contacts
  • My account
  • Cart
0$0.00

How to Make a 3D Printed Selfie With Your Phone – Tom's Hardware

Vyborgrad
Mar 8, 2022 3D printing & printers Comments Off on How to Make a 3D Printed Selfie With Your Phone – Tom's Hardware

Tom’s Hardware is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Learn more
By Andrew Sink published 25 July 21
Learn how you can make a 3D printed selfie, no expensive scanner required.
If you’ve ever been interested in 3D scanning, you might be surprised to find out that you may already have a 3D scanner in your pocket. Using the front-facing TrueDepth camera on the iPhone X and newer (sadly, Android is not supported), you can create a 3D scan of your face, export it as a 3D model, and create a copy using a 3D printer. In this article, we’ll go over the process of how to create a 3D selfie using your phone and how to 3D print it. No 3D sculpting experience is required, as the app we’ll be using creates a fully printable model with no modifications required.
We’ll be using the iPhone app FaceApp by Bellus3D for this article. The app is free to download and use, and you can create unlimited scans with it for free. The app costs $0.99 to export a 3D model for printing, but you can take as many scans as you want before printing to get the hang of the scanning process. 
3D Printed Selfie With Your Phone
Before we get started, you’ll need to download the FaceApp scanning app on your iPhone, as well as the slicer app for your 3D printer. 
1. Download the FaceApp scanning app from the iOS App Store. This is a free app to download and use, so you can experiment with the software without buying any scans or subscriptions.
2. Download the slicer software for your 3D printer. We’ll be using Ultimaker Cura, a free app, with the Anycubic Vyper but other slicer apps for FDM 3D printers such as PrusaSlicer, Simplify3D, FlashPrint and others will have similar workflows. 
3D Printed Selfie With Your Phone
The first part of this project is going to be creating a 3D model of your head to 3D print. The model we create needs to be 3D printable, so we’re going to make a full model of your head and ensure that it is in a file format that your 3D printing software can use after exporting it. By the end of this step, you should have a 3D model that’s ready to use.
1. Open Bellus3D FaceApp on your iPhone and take note of the different scan options. FaceApp offers three separate modes for scanning: Face, Face + Neck, and Full Head.
2. Select the Full Head option to create a 3D model that can be printed.
3D Printed Selfie With Your Phone
3. Follow the prompts from FaceApp and rotate your head to the sides, up, and down to allow the app to fully capture your face. FaceApp will take this scan data and automatically generate a mesh of your face while extending the side edges to create the back of your head. 
3D Printed Selfie With Your Phone
3D Printed Selfie With Your Phone
3D Printed Selfie With Your Phone
4. Select ‘Light’ then ‘Surface’ once the scan has finished to see the mesh of your 3D scan. The mesh is the actual geometry of the model without the colored texture wrapped around it. This is what we’ll be 3D printing, so we want to make sure it looks satisfactory before continuing. If you’re not happy with the mesh, you can redo the scan until you have one you’re satisfied with.  
3D Printed Selfie With Your Phone
5. Unlock the model for 3D printing by selecting ‘Unlock’. Once unlocked, the scan can be shared as a 3D model or just a link to see the scan in 3D.  
3D Printed Selfie With Your Phone
6. Toggle the Watertight setting to create a solid 3D mesh. This will create a solid base for your model, which allows it to be 3D printed. 
7. Select HD for mesh resolution to create a high resolution mesh. This will have more detail at the expense of a slightly higher file size, but it will result in a sharper 3D model. 
8. Select export STL file to export a 3D printable file. Once exported, this file can be loaded into your slicer app to prepare for 3D printing.  
In this step, we’ll be creating a 3D printable file from our 3D scan. If this is your first time printing a 3D model, you can learn more about the process in our guide to making your first 3D print from an .STL. Once exported from FaceApp, the 3D scan is ready to be sent to your slicer app to prepare it for 3D printing. The model itself will export from the app as watertight (not requiring any holes to be filled), so no additional sculpting is required.  
3D Printed Selfie With Your Phone
1.  Import the 3D Scan .STL file by dragging it into the Cura workspace. Notice that the model imports at full size (the size of your actual head), so we’ll need to resize and angle it before printing. 
3D Printed Selfie With Your Phone
2. Scale the model so it fits entirely inside the build volume of the 3D printer. We scaled this model down to 35% for this article, but you can make it bigger or smaller.
3. Rotate the model to reduce the amount of support material generated. By rotating the model on the Y axis so it’s facing upwards, the amount of support material generated underneath the eyes and nose is minimized. Rotating about 45 degrees should give the best results without making the model unnecessarily difficult to print. 
3D Printed Selfie With Your Phone
4. Slice the model to preview the full toolpath before printing. You’ll want to make sure you have selected ‘Supports’ to generate support material before printing. You can see the difference in amount of support material generated between the original model and the rotated model, which results in a faster, cleaner print.  
3D Printed Selfie With Your Phone
3D Printed Selfie With Your Phone
5. Examine the toolpath to check for any issues before printing. This model was sliced using the default slicer app settings included with the Anycubic Vyper, with only some minor changes made to speed up the print. 
3D Printed Selfie With Your Phone
6. Save and export the model to the SD card once it has been sliced and prepared for printing. Once this step is complete, your 3D scan is fully prepared for 3D printing.  
Once the model has been sliced and is ready for export, it’s time to transfer the file to the printer and begin the printing process. In this step, we’ll go over what’s required to load the model in the printer and start the print. These steps are specific to the Anycubic Vyper 3D printer, but most FDM 3D printers will be prepared in a similar fashion.
1. Load the PLA filament into the printer and make sure the bed has been properly calibrated. Properly calibrating the bed of the printer is a critical step of the 3D printing process, and you can read about the process in more detail in our guide to printing your first model. 
3D Printed Selfie With Your Phone
2. Insert the SD card into the printer and select the exported model to begin the printing process. At 35% of life size, this print took five hours and 26 minutes  to complete.
3D Printed Selfie With Your Phone
3. Remove the model from the bed once the print has completed. On the Anycubic Vyper, this is easily accomplished by flexing the textured platform and allowing the part to easily detach.  
3D Printed Selfie With Your Phone
In the final step of this article, we’ll remove the support material from this print and prepare it for display. 
1. Remove the support material from the model while being careful not to damage the surface of the model or your hands. The support material should detach from the surface of the model without leaving any marks or defects. 
3D Printed Selfie With Your Phone
3D Printed Selfie With Your Phone
2. Check the model for any defects or areas that didn’t print correctly. At this point, your 3D selfie is complete and ready for display. 
3D Printed Selfie With Your Phone
Once the part is finished, you will have successfully created a 3D selfie of yourself using a 3D scanner app and a 3D printer. You can take this idea even further by using this 3D selfie as part of a chess piece, creating a custom bobble-head for your friends, or making a family portrait by scanning your family and printing their 3D selfies. 
3D Printed Selfie With Your Phone
Get instant access to breaking news, in-depth reviews and helpful tips.
Thank you for signing up to Tom’s Hardware. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Tom’s Hardware is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site.
© Future US, Inc. 11 West 42nd Street, 15th Floor, New York, NY 10036.

source

Related Posts

  • Convert a home 3D printer to make printed food - ZDNet
  • IKEA launches FLAMTRÄD on-demand 3D printed decorative items - 3DPMN
  • We 3D printed a giant lithophane photo of the Mandalorian - DIYphotography
  • Learn How to Make Your Own 3D Printed Jewelry - MakeUseOf
3d printer3d printing
How to Make 3D Printing Better – HBR.org DailyPrevious post
Here's how I 3D-Printed these hinges to make a sturdy studio V-Flat – DIYphotographyNext post

Categories

  • Articles
    • 3D printing & printers
    • Cricut & Cameo
    • Laser CNC machines
    • Milling CNC machines
    • Software
  • Editable forms
  • News

Recent Posts

  • PLA vs. ABS Filaments for 3D Printing: What's the DIfference? – MUO – MakeUseOf
  • DIY SLS 3D Printer Getting Ready To Print – Hackaday
  • Turning A MIG Welder Into A Metal 3D Printer – Hackaday
  • Power of Grassroots Innovation: How a Nondescript Box Has Been Saving Lives During the COVID Pandemic – SciTechDaily
  • Filament Dry Box Design Goes Way Over The Top – Hackaday

Subscribe us

Follow us

facebookinstagrampinterest

Navigation

  • Main
  • Shop
    • For CNC
    • For laser
    • For 3d printer
    • For Cricut & Silhouette
    • Harry Potter universe
    • Layered pannos
    • Printable
    • Vector clipart
    • Fonts
  • Blog
    • Articles
    • Editable forms
  • Contacts
  • My account
  • Cart
  • About
    • Terms and conditions
  • Blog
  • Cart
  • Checkout
  • Contacts
  • Donation page
  • Main
  • My account
  • Order Cancelled
  • Order Cancelled
  • Order Cancelled
  • Privacy Policy
  • Shop

3d STL Art Corel Draw project crest of houses Cut CNC Designs Cut File Digital Digital design digital print download PNG AI EPS Downloads Drawing Faculties Hogwarts fan art file for 3D printer Files for CNC Gryffindor Gryffindor SVG Harry Potter cricut Harry Potter SVG Home decor Hufflepuff SVG Laser engraving Led engraved lamp Painting Reproduction PNG AI EPS print Potter emblems SVG Potter Universe Print Printable file Print logo Ravenclaw Ravenclaw SVG Slytherin Slytherin SVG SVG AL PNG CDR DXF TIF TV Frame Vector Clipart Vector Illustration Vector image file Wallpaper Wizarding world Wood Relief Drawing World of Pottery

Vyborgrad© 2019-2021

Accepting payments via bank cards and paypal is temporarily not working. But you can pay with bitcoins! Dismiss

error: Alert: Content is protected.